|
|
2024-25 Catalog ARCHIVED CATALOG: Content may no longer be accurate.
Course Descriptions - PDD, ETM, MFET, MSE
|
|
Department of Manufacturing and Systems Engineering
EET 2120 - Power and Motors Credits: (4)
Typically Taught Fall Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Introduction to AC and DC motors, relays, transformers, power measurements, National Electrical Code, ladder logic, wiring, and programmable logic controllers (PLCs).
Lecture and lab combination. Laboratory activities to include the design, construction, and analysis of basic power circuits and machinery configurations.
Pre-requisite(s): EET 1140 , MATH 1060 or higher.
EET 2130 - PC Board Design Credits: (3)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: An introduction to the design of printed circuit boards and packaging with emphasis on the design, simulation, analysis and packaging of circuits.
Lecture and lab combination. Laboratory activities include the design, construction, and testing of prototype circuit boards. CAD programs will be used for the design and layout of circuit boards.
Pre-requisite(s): EET 2110 .
EET 2140 - Communications Systems Credits: (4)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Introduction to digital and wireless communication circuits. Topics to include radio frequency circuits, modulation, detection, transmitters, receivers, transmission lines, antennas, and measurement instruments. Digital communications topics to include parallel and serial data transmission.
Lecture and lab combination. Laboratory activities to include the design, construction, computer simulation, and analysis of communication circuits.
Pre-requisite(s): EET 2110 .
EET 2150 - Embedded Controllers Credits: (4)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: A study of microprocessors, embedded controllers, operational characteristics, computer architecture, machine code programming, memory devices, and interfacing.
Lecture and lab combination. Laboratory activities include the design, construction, and analysis of microprocessor based systems. Analysis techniques include the use of assemblers, cross-assemblers, and emulators.
Pre-requisite(s): Credit for or Current Enrollment in EET 2110 .
EET 2160 - Troubleshooting Credits: (3)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: An introduction to troubleshooting techniques and skills. Topics include the use of diagnostic electronic test equipment such as multi-meters, power supplies, signal generators, digital storage oscilloscopes, and spectrum analyzers. Students will diagnose and repair electronic circuits and systems.
Lecture and laboratory combination.
Pre-requisite(s): EET 2110 , EET 2120 , EET 2170 .
EET 3010 - Circuit Analysis Credits: (4)
Typically Taught Fall Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Advanced calculus-based topics related to electronic circuit analysis, Laplace transforms, differential equations, Fourier series, Fourier transforms, and applications. Lecture and lab combination. Laboratory activities include circuit design, construction, computer simulation, and analysis.
Pre-requisite(s): EET 2110 , EET 2140 , Credit for or Current Enrollment in in MATH 1210 .
EET 3030 - FPGA and ASIC Design Credits: (4)
Typically Taught Fall Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Introduction to field programmable gate arrays (FPGA) and application specific integrated circuit (ASIC) design.
Lecture and lab combination. Laboratory activities to include the use of computer design tools to design, model, simulate, and program gate arrays and application specific integrated circuits.
Pre-requisite(s): EET 2150 .
EET 3040 - Instrumentation and Measurements Credits: (4)
Typically Taught Fall Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Introduction to electronic data acquisition, data analysis, error analysis, signal measurement, and automatic testing techniques.
Lecture and lab combination. Laboratory activities to include the design, construction, and analysis of measurement circuits, data acquisition circuits, instrumentation devices, and automatic testing.
Pre-requisite(s): EET 2110 , EET 2170 .
EET 3050 - Microprocessor Systems Credits: (4)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Microprocessor system development using modern software design principles and high level programming languages. Topics include peripheral interfacing, real-time operating systems and debugging techniques.
Lecture and lab combination. Laboratory activities to include design, simulation, computer programming, analysis, and troubleshooting.
Pre-requisite(s): EET 2150 and either CS 1410 or CS 2250 .
EET 3060 - Real-Time Embedded Controllers Credits: (4)
Typically Taught Fall Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: An introduction to real-time kernals and operating systems. Priority-based pre-emptive scheduling, intertask communication, and intertask synchronization will be studied. Other topics include priority inversions, semaphores, mutexes, context switches, rate monotonic analysis (RMA), various kernal services, finite state machines, and nested state machines.
Pre-requisite(s): EET 2150 .
EET 3080 - Embedded Networks Credits: (4)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: This course provides an in-depth study of several serial communication standards and how to implement them in embedded systems. The standards addressed in this class include RS232, RS485, Controller Area Network (CAN), and Ethernet. Emphasis will be placed on utilizing the stacks and protocols for each standard. The channel bandwidth, noise, and data error rate will be addressed. Wireless methods of serial communication will be surveyed.
Pre-requisite(s): EET 2150 .
EET 3090 - Project Management Credits: (2)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: EET 3090 Project Management course is designed to prepare students for the senior capstone project. The course will include development of a contract, goal setting, time management, budgeting, project funding, project leadership and team building principles. Engineering economics, team work, quality statistics and continuous improvement will also be discussed. Other topics include project life cycles, organization and risk management.
Pre-requisite(s): EET 1110 , and EET 1140 , and EET 2010 .
EET 4010 - Senior Project I Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Students will work on teams to design, construct, test, and install a significant engineering project. The course includes selecting a team, selecting a project, writing a contract, maintaining a logbook, creating and following project milestones, setting and completing weekly goals, writing a manual, and making a final presentation to students, faculty, and industry advisers.
Pre-requisite(s): EET 3090 .
EET 4020 - Senior Project II Credits: (2)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: A continuation of EET 4010 Senior Project I. Students will work on teams to design, construct, test, and install a significant engineering project. The course includes selecting a team, selecting a project, writing a contract, maintaining a logbook, creating and following project milestones, setting and completing weekly goals, writing a manual, and making a final presentation to students, faculty, and industry advisers.
Pre-requisite(s): EET 4010 .
EET 4030 - Controls & Systems Credits: (4)
Typically Taught Fall Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Introduction to automatic control theory, analysis, and testing, pole, zero, Bode plots, and frequency response. The design and application of programmable controllers using ladder logic, sequential functions charts, PID, and data highway.
Lecture and lab combination. Laboratory activities to include computer simulation, servo-system construction, and analysis.
Pre-requisite(s): EET 3010 , MATH 1210 , PHYS 2210 .
EET 4040 - Signals and Systems Credits: (4)
Typically Taught Spring Semester: Full Sem
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: An introduction to digital signal processing, digital filters, discrete and fast Fourier transforms, quantization, introduction to adaptive filters, industrial applications, and DSP hardware.
Lecture and lab combination. Laboratory activities include the design, construction, computer simulation, and analysis of digital signal processing circuits.
Pre-requisite(s): EET 3010 , MATH 1210 .
EET 4060 - Advanced Communications Credits: (4)
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: Introduction to satellite communications, spread spectrum techniques, digital satellite communications, antennas, small signal amplifiers, Smith charts, and “S” parameter analysis.
Lecture and lab combination. Laboratory activities to include the design, construction, computer simulation and analysis of wireless communications circuits and systems.
Pre-requisite(s): EET 3010 .
EET 4090 - Systems Design and Integration Credits: (3)
Course Fee: $5.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: An introduction to the fundamentals of large-scale systems. The first part deals with systems analysis, design and integration with emphasis on input/output models, transfer functions, and interface issues. The second part discusses a variety of systems design and management approaches, particularly those concerned with system requirements, interface control, evaluation, quality assurance through configuration management, audits and reviews, and the human role in systems.
Pre-requisite(s): EET 3090 .
ETM 5913G - Six Sigma Tools I Credits: (3)
Description: This distance learning course provides an introduction to the six sigma body of knowledge as defined by the American Society of Quality (ASQ). The course will examine the foundations of six sigma and the statistical tools used in the initial stages of the DMAIC problem solving methodology.
Pre-requisite(s): BS with three years relevant experience & an engineering statistics undergraduate course or equivalent such as MATH 3410 is required, or instructor’s approval. Students also must be able to work on an approved six sigma project at a firm.
ETM 5923G - Six Sigma Tools II Credits: (3)
Description: This distance learning course is a follow-on to the initial six sigma course and provides additional detail on the analyze, improve and control portions of the DMAIC problem solving methodology. This course is required for the Institutional Certificate in Quality and Lean Manufacturing, and can be used as a technical elective for the Oklahoma State University Engineering Technology Management Master’s Degree.
Pre-requisite(s): ETM 5913G , Six Sigma Tools I.
ETM 5933G - Lean Tools Credits: (3)
Description: This course teaches students lean manufacturing tools for continuous improvement in a manufacturing environment.
Pre-requisite(s): BS with three years relevant experience & an engineering statistics undergraduate course or equivalent such as Math 3410 is required, or instructor’s approval. Students also must be able to work on an approved six sigma project at a firm. This distance learning course is required for the Institutional Certificate in Quality and Lean Manufacturing, and can be used as a technical elective for the Oklahoma State University Engineering Technology Management Master’s Degree.
ETM 5943G - Lean-Sigma Implementation Credits: (3)
Description: This course introduces students to the implementation skills necessary to successfully combine and apply lean manufacturing and six sigma concepts in small to mid-sized manufacturing facilities. This course is required for the Institutional Certificate in Quality and Lean Manufacturing, and can be used as a technical elective for the Oklahoma State University Engineering Technology Management Master’s Degree.
Pre-requisite(s): ETM 5923G , ETM 5933G .
MFET 1000 - Manufacturing Engineering Technology Fundamentals Credits: (3)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $65.00
Course Fee Purpose: Lab related consumables and maintenance of laboratory equipment.
Description: This is an introductory course for students interested in majoring in Manufacturing Engineering Technology. Students will be exposed to Manufacturing Engineering Technology through several hands-on laboratory experiences that introduce them to concepts needed for future classes. Students will gain a clear understanding of degree requirements and possible career paths.
MFET 1150 - Pre-Professional Seminar in Manufacturing Credits: (1)
Typically Taught Fall Semester: Full Sem
Description: An introductory course for students planning to major in Manufacturing Engineering Technology. An explanation of the Manufacturing Engineering Technology curriculum and its place in the occupational spectrum. Current job functions of manufacturing engineering technologists will be discussed by manufacturing engineers and technologists from industry.
MFET 1210 - Machining Principles Lecture/Lab I Credits: (3)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $45.00
Course Fee Purpose: Consumables (aluminum, steel, tools), paper, lab support, computers, software licenses, lab equipment
Description: Introduction to machining processes through theory and practice including: setup and operation of the engine lathe & milling machine, machine and tool performance, inspection techniques, basic blueprint reading, and process planning. Students will utilize lab time to complete assignments as required.
One lecture per week and two 3-hour labs per week are required.
MFET 1810 - Experimental Course Credits: (1-6)
Experimental
Description: Consult the semester class schedule for the current offering under this number. The specific title and credit authorized will appear on the student transcript.
May be repeated for a total maximum of 6 credit hours.
MFET 1820 - Manufacturing Electricity and Electronics Credits: (4)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Description: Introduction to basic electrical and electronic principles and the application of these principles to AC and DC circuits. The course will give students the foundation for required manufacturing courses in welding power supplies, motor controls and automation. An integrated hands-on lab will reinforce concepts taught in the classroom
Pre-requisite(s): MATH 1010 or QL.
MFET 1890 INT - Cooperative Work Experience Credits: (1-3)
Typically Taught Fall Semester: Full Sem
Description: Open to all first year students in Manufacturing Engineering Technology. Department approval required before registration. Provides academic credit for on-the-job experience. Grade and amount of credit will be determined by the department.
MFET 2150 - Metal Forming, Casting and Welding Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $10.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: Introduction to industrial metal forming, casting and welding processes, equipment selection, design criteria, shop procedures and terminology.
Two one-hour lectures per week and one two-hour lab
Co-Requisite(s): MFET 2150L . (MFET 2150L ) is required.
MFET 2150L - Metal Forming, Casting & Welding Lab Credits: (1)
Typically Taught Fall Semester: Full Sem
Course Fee: $75.00
Course Fee Purpose: Paper, lab support, shop supplies for casting/welding/sheet metal
Description: Lab application of theories taught in MFET 2150 by use of student projects.
Co-Requisite(s): MFET 2150 .
MFET 2151 - Metal Forming Lecture/Lab Credits: (1)
Typically Taught Fall Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, shop supplies for casting/welding/sheet metal
Description: Introduction to industrial metal forming processes, equipment selection, design criteria, shop procedures and terminology.
Pre-requisite(s): Instructor Approval.
MFET 2152 - Metal Casting Lecture/Lab Credits: (1)
Typically Taught Fall Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, shop supplies for casting/welding/sheet metal
Description: Introduction to industrial metal casting processes, equipment selection, design criteria, shop procedures and terminology.
Pre-requisite(s): Instructor Approval.
MFET 2153 - Metal Welding Lecture/Lab Credits: (1)
Typically Taught Fall Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, shop supplies for casting/welding/sheet metal
Description: Introduction to industrial metal welding processes, equipment selection, design criteria, shop procedures and terminology.
Pre-requisite(s): Instructor Approval.
MFET 2300 - Statics and Strength of Materials Credits: (5)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Description: Principles of forces, moments, resultants & static equilibrium of force systems, center of gravity, friction, and free body diagram analysis. Also concept of stress and strain, shear, bending moments, torsion, bending stresses in beams and stress resolution and shear.
Five lectures per week.
Pre-requisite(s): PHYS 2010 /L or PHYS 2210 /L; MATH 1060 or MATH 1080 or MATH 1210 .
MFET 2310 - Statics for Engineering Technology Credits: (3)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $15.00
Course Fee Purpose: Course fees: Course fees support computer lab aids, lab computers, and software licensing in the computer labs.
Description: Topics include: Principles of forces, moments, resultants & static equilibrium of force systems, center of gravity, friction, and free body diagram analysis.
Pre-requisite(s): MATH 1080 or MATH 1050 and MATH 1060 .
MFET 2320 - Mechanics of Materials Credits: (3)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $15.00
Course Fee Purpose: Course fees: Course fees support computer lab aids, lab computers, and software licensing in the computer labs.
Description: Topics include: Principles of stress and strain, shear, bending moments, torsion, and bending stresses in beams.
Pre-requisite(s): MFET 2310 .
MFET 2360 - Manufacturing Processes and Materials Credits: (3)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: Survey of industrially important processes used to change material shape and condition for industrial use. Survey of industrially important materials and the principles of material behavior.
MFET 2410 - Quality Concepts and Statistical Applications Credits: (3)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $40.00
Course Fee Purpose: Paper, lab support, consumables, instructor supplies, simulation materials, computers, software licenses, lab equipment
Description: This is the first course in a series of three designed to impart the Six Sigma body of knowledge. It integrates managerial, technological and statistical concepts across all functions of an organization to ensure that a product is fit for use. Provides a foundation in current quality paradigms and introduces students to software tools (MS Excel and Minitab) used to statistically analyze problems encountered in manufacturing firms.
Three lectures per week.
Pre-requisite(s): MATH 1010 or Aleks (score: 30 or above).
MFET 2440 - Computer Numeric Control (CNC) in Manufacturing Credits: (2)
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: This course is designed for those who have little or no experience with CNC programming, setup or operations. Manual programming, APT programming, and Mazatrol (a conversational programming language) will be taught. In addition, an introduction to CAD/CAM will also be discussed.
A three-hour lab, once a week is required.
Pre-requisite(s): MATH 1080 or MATH 1050 and MATH 1060 ; MFET 1210 .
Co-Requisite(s): MFET 2440L .
May be repeated 3 times up to 6 credit hours.
MFET 2440L - CNC in Manufacturing Lab Credits: (1)
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: Applications of the theory taught in MFET 2440 . Introduction to the setup & operation of the CNC lathe and mill.
One 3-hour lab per week.
Co-Requisite(s): MFET 2440 .
MFET 2500 - Process Automation I Credits: (1)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Computer lab refurbishment, software, lab aide
Description: A study of the elements used in manufacturing automation and control technologies including: basic elements of an automated system, cost benefit analysis, programmable logic controllers, robotics (servo and non-servo), material handling devices and automated inspection technologies. One 50 minute lecture per week.
Pre-requisite(s): EET 1850 .
Co-Requisite(s): MFET 2510 .
MFET 2510 - Process Automation I Lab Credits: (2)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $75.00
Course Fee Purpose: Automation equipment and consumables
Description: Students duplicate demonstration sequences of automation equipment and develop new routines in: Controlling servo and non-servo robots, computer-aided manufacturing systems, programmable logic controllers, and other devices used in process automation. Labs will include additional lectures.
Pre-requisite(s): EET 1850 .
Co-Requisite(s): MFET 2500 .
MFET 2550 - Basics of Quality Engineering Credits: (2)
Description: Approaches quality from the perspective of the production technician using applied statistics, total quality concepts, inspection techniques and methods and nonconforming material control. Addresses sampling principles used in production management as well as a review of industry accepted standards. (ASQC Series)
Note: This course is offered in the evenings only.
MFET 2610 - Quality Improvement Principles and Techniques Credits: (2)
Description: This course assesses vital knowledge of quality tools and their uses by individuals, from non-traditional quality areas, who are involved in quality improvement projects. The course examines the rapid spread of quality principles and practices throughout organizations, and covers the essentials of quality management for individuals who manage quality programs, but who are not necessarily specialized in traditional quality areas. The course prepares students for the Certified Quality Improvement Associate examination administered by the American Society for Quality.
MFET 2670 - GMA, FCA and GTA Welding Credits: (1)
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: Theory and skills course covering Gas Metal Arc Welding, Flux Core Arc Welding, and Gas Tungsten Arc Welding.
Pre-requisite(s): MFET 2150 /MFET 2150L or MFET 2153 .
Co-Requisite(s): MFET 2670L .
MFET 2670L - GMA, FCA and GTA Welding Lab Credits: (2)
Typically Taught Spring Semester: Full Sem
Course Fee: $75.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: A “hands on” lab that reinforces the theory and skills course (MFET 2670 ) covering Gas Metal Arc Welding, Flux Core Arc Welding, and Gas Tungsten Arc Welding.
Pre-requisite(s): MFET 2150 /MFET 2150L .
Co-Requisite(s): MFET 2670 .
MFET 2830 - Directed Readings in Manufacturing Engineering Technology Credits: (1-3)
Typically Taught Fall Semester: Full Sem
Description: Individual research on topics requested by industry or which meet special needs of Manufacturing Engineering Technology students.
Pre-requisite(s): Departmental approval.
MFET 2850 - CNC/CAM for Plastics and Composites Lecture/Lab Credits: (3)
Typically Taught Fall Semester: Full Sem
Course Fee: $60.00
Course Fee Purpose: Plastic material, paper, lab support, computers, software licenses, lab equipment
Description: Traditional and nontraditional methods for machining organic-matrix and metal-matrix composites are reviewed. Traditional machining procedures are discussed together with the damage introduced into composites by these manipulations. Computer Numerical Control (CNC) codes and Computer Aided Manufacturing are covered, focusing on the production of plastic products and tooling. Machining concepts also including laser, water-jet, electrodischarge, electrochemical spark, and ultrasonic machining.
Pre-requisite(s): MFET 1210 /L.
MFET 2860 - Plastics/Composites Materials & Properties Credits: (3)
Typically Taught Fall Semester: Full Sem
Course Fee: $60.00
Course Fee Purpose: Plastic material, paper, lab support, computers, software licenses, lab equipment
Description: Coverage of the most common commercial plastics including their additives, fillers, and fibers; includes common physical tests used to determine material characteristics; writing intensive.
Pre-requisite(s): CHEM 1110 .
MFET 2870 - Design of Plastics/Composites Products Credits: (3)
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Plastic material, paper, lab support, computers, software licenses, lab equipment
Description: Designing plastic parts utilizing CAD and CAE technologies for the design and for structural, dimensional, and process evaluation and optimization. A strong emphasis in design principles related to design of plastics products. Also analysis of functional requirements, structural properties, aesthetic qualities and cost relationships. The student will gain experience in product design and material evaluation.
Pre-requisite(s): PDD 1160 and MFET 2860 .
MFET 2890 INT - Cooperative Work Experience Credits: (1-3)
Typically Taught Fall Semester: Full Sem
Description: Open to all second year students in Manufacturing Engineering Technology. A continuation of MFET 1890 .
MFET 2920 - Short Courses, Workshops, Institutes, and Special Programs Credits: (1-6)
Workshop
Description: Consult the semester class schedule for the current offering under this number. The specific title and credit authorized will appear on the student transcript.
Pre-requisite(s): Departmental approval.
May be repeated for a total maximum of 6 credit hours.
MFET 3010 - Tool Design Credits: (3)
Description: Principles of workpiece control including: Geometric, dimensional, and mechanical control. Other topics include: process tolerance stacks, design of special tools and gauges, applications in the production of manufactured parts, tool drawings, specifications, and modular tooling.
Three lectures per week.
Pre-requisite(s): MFET 1210 ; PDD 1160 .
MFET 3060 - Codes, Weld Inspection, and Quality Assurance Credits: (3)
Typically Taught Fall Semester: Full Sem
Course Fee: $35.00
Course Fee Purpose: Computer lab fees and supplies used in the Lab portion of this course.
Description: Study of ASME and AWS codes as relating to procedure qualification and welder qualification for fabrication of pressure vessels and structures, and how codes relate to quality assurance and ISO 9000.
Pre-requisite(s): MFET 2150 /MFET 2150L or MFET 2153 .
MFET 3310 - Material Selection and Heat Treat Credits: (2)
Description: Terminology, concepts and principles involved in the selection, specification and processing of engineering materials so they meet design criteria including load, life, and appearance. Testing methods to determine those properties and characteristics. Manual and computer assessing of material data.
Two lectures per week.
Pre-requisite(s): MFET 1210 /L, MFET 2300 , CHEM 1110 .
Co-Requisite(s): MFET 3310L .
MFET 3310L - Material Selection and Heat treat Lab Credits: (1)
Description: Application of theory taught in MFET 3310 .
One 2-hour lab per week.
Co-Requisite(s): MFET 3310 .
MFET 3320 - Machine Design Credits: (2)
Description: Application of engineering fundamentals to the design of individual machine components such as shafts, couplings, springs, bearings, gears, fasteners, clutches, and breaks. Students will be required to complete a design project emphasizing manufacturing equipment.
Two lectures per week.
Pre-requisite(s): MFET 2300 .
MFET 3340 - Applied Fluid Power Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $10.00
Course Fee Purpose: Paper, lab support, Hydraulic fluid, hydraulic lab components, computers, software licenses, lab equipment
Description: Principles of fluid mechanics and component operation as they apply to the design of hydraulic and pneumatic systems. Computer programs may be used to analyze and design systems. Two lectures per week.
Pre-requisite(s): MFET 2300 or MFET 2320 or ENGR 2010 and ENGR 2140 ; PHYS 2010 /L or PHYS 2210 /L.
Co-Requisite(s): MFET 3340L .
MFET 3340L - Applied Fluid Power Lab Credits: (1)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $30.00
Course Fee Purpose: Paper, lab support, Hydraulic fluid, hydraulic lab components, computers, software licenses, lab equipment
Description: Application of the theory taught in MFET 3340 .
One 2-hr lab per week.
Co-Requisite(s): MFET 3340 .
MFET 3350 - Plastic and Composite Manufacturing Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $10.00
Course Fee Purpose: Plastic material, paper, lab support, computers, software licenses, lab equipment
Description: Design and processing of plastic and composite materials for industrial applications.
Two lectures per week.
Pre-requisite(s): CHEM 1110 or CHEM 1210 .
Co-Requisite(s): MFET 3350L .
MFET 3350L - Plastic and Composite Manufacturing Lab Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $60.00
Course Fee Purpose: Plastic material, paper, lab support, computers, software licenses, lab equipment
Description: Application of the theory taught in MFET 3350 .
Two 2-hr labs per week.
Pre-requisite/Co-requisite: MFET 3350 .
MFET 3460 - Engineering Design using Solid Modeling Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $10.00
Course Fee Purpose: Paper, lab support, 3D print material, computers, software licenses, lab equipment
Description: An advanced computer-aided design course using state-of-the-art solid modeling CAD/CAM software. Topics include: 3D parametric solid modeling, applications associativity, design-by-feature, assembly modeling, injection mold design, flat pattern development, design analysis using FEA, realistic rendering, and detailing.
Pre-requisite(s): PDD 1010 .
Co-Requisite(s): MFET 3460L .
MFET 3460L - Engineering Design using Solid Modeling Lab Credits: (1)
Typically Taught Fall Semester: Full Sem
Course Fee: $15.00
Course Fee Purpose: Paper, lab support, 3D print material, computers, software licenses, lab equipment
Description: Lab assignments will include: Fundamentals of 3D parametric solid modeling, Extrude & Revolve Features, Sweep & Loft Features, Assembly Modeling, Injection Mold Design, Flat Pattern Development, Design Analysis using FEA, and others.
Pre-requisite(s): PDD 1010 and WEB 1700 .
Co-Requisite(s): MFET 3460 .
MFET 3510 - Basics of Supply Chain Management Credits: (2)
Description: Introductory course for production and inventory management personnel which provides basic definitions and concepts for planning and controlling flow of materials into, through, and out of an organization. Explains fundamental relationships of supply chain from suppliers to customers. Addresses manufacturing systems, forecasting, master planning, material requirements planning, capacity management, production activity control, purchasing, inventory management, distribution, quality management, and Just-in-Time manufacturing. (APICS Series).
Note: This course is offered in the evenings only.
MFET 3550 - Manufacturing Supervision Credits: (3)
Typically Taught Fall Semester: Full Sem Online
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: The application of supervision skills. Students will gain an understanding of; motivation of subordinates, personal leadership theories, problem-solving and decision-making techniques, organizational communication, employee selection, evaluation and training process, and organizational structures. Topics will include; the American Disabilities Act, OSHA and environmental issues, Equal opportunity Employment, and Affirmative Action issues. Three lectures per week.
Pre-requisite(s): MFET 2410 (or MATH 1040 ).
MFET 3560 - Advanced Quality Engineering Credits: (2)
Description: Addresses the application of advanced quality techniques by personnel in positions of responsibility such as manufacturing leads and supervisors. Uses statistics, metrology, inspection methods, quality management concepts, and sampling principles to address process decisions involving both overall quality and costs. (ASQC Series).
Pre-requisite(s): MFET 2550 .
Note: This course is offered in the evenings only.
MFET 3570 - Manufacturing Quality Auditing Credits: (2)
Description: Utilizes auditing principles and quality management tools and techniques to prepare an individual to plan and conduct, or prepare an organization, for a quality audit. Links directly to process associated with implementation of ISO 9000 standards.
Two one-hour lectures per week. (ASQC Series).
Pre-requisite(s): MFET 2410 or equivalent.
Note: This course is offered in the evenings only.
MFET 3580 - Certified Mechanical Inspector Credits: (2)
Description: Provides the student with terminology, concepts and tools needed to be professionally competent in advanced quality management. The course will also be helpful to those preparing to take the ASQC CMI Certification Exam. (ASQC Series).
Note: This course is offered in the evenings only.
MFET 3610 - Machining Processes Lecture/Lab II Credits: (3)
Description: The manufacture and assembly of precision and interchangeable parts using conventional lathes, mills, drills, and grinders. Introduction to geometric dimensioning & tolerancing (GD&T), and advanced inspection techniques. Students will utilize lab time to complete assignments as required.
One lecture per week and two 3-hour labs per week are required.
Pre-requisite(s): MFET 1210 .
MFET 3620 - Senior Capstone Project Planning Credits: (.5)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Description: This course must be taken the semester prior to beginning the MFET senior project sequence of classes (MFET 4610 , MFET 4610L and MFET 4620L ). Capstone requirements will be discussed. Capstone projects will be selected and teams formed with faculty input.
Pre-requisite(s): Department Approval.
MFET 3630 - Fusion Joining and Brazing Processes Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $10.00
Course Fee Purpose: Paper, lab support, welding supplies, computers, software licenses, lab equipment
Description: Study of SAW, ESW, GMAW, EG, RW, PAW, PAC, Electron Beam, Laser, Friction, Brazing, and other welding processes.
Pre-requisite(s): MFET 2670 /MFET 2670L .
Co-Requisite(s): MFET 3630L .
MFET 3630L - Fusion Joining and Brazing Processes Credits: (1)
Typically Taught Fall Semester: Full Sem
Course Fee: $85.00
Course Fee Purpose: Paper, lab support, welding supplies, computers, software licenses, lab equipment
Description: A “hands-on” lab that reinforces the concepts taught in MFET 3630 of SAW, ESW, GMAW, EG, RW, PAW, PAC, Electron Beam, Laser, Friction, Brazing, and other welding processes.
Pre-requisite(s): MFET 2670 /MFET 2670L .
Co-Requisite(s): MFET 3630 .
MFET 3650 - Quality Management Institute Credits: (3)
Description: This course consists of application process control and problem solving techniques including statistical process control (SPC), measurement systems analysis, and process capability analysis. Students will apply cause-and-effect diagrams, check sheets, sampling, line and bar charts, Pareto charts, scatter diagrams, variation, probability plots, x-R charts, gate repeatability and reproducibility (gage R & R) on course projects. Curriculum will include practical application exercises.
Pre-requisite(s): MFET 2410 , MATH 1010 Intermediate Algebra or equivalent, and Basic Statistics course (MATH 1040 ) or equivalent.
MFET 3710 - Computer Aided Manufacturing and Rapid Prototyping Credits: (2)
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, software licenses
Description: This course will introduce and explain concepts behind Computer-Automated Manufacturing (CAM). It will define elements, terms, and concepts involved with CAM. Elements of rapid prototyping will also be covered from conceptual design in solids to production of tooling and parts. This course is designed for those who have the basic understanding of the setup and operation of CNC machine tools and programming. Software will be used to perform the CAM operations, such as part generation and post processing.
Pre-requisite(s): MFET 2440 /MFET 2440L , PDD 1010 , PDD 1160 or MFET 3460 .
Co-Requisite(s): MFET 3710L .
MFET 3710L - Computer Aided Manufacturing and Rapid Prototyping Lab Credits: (1)
Typically Taught Spring Semester: Full Sem
Course Fee: $35.00
Course Fee Purpose: Waterjet nozzles, steel, plastic shop consumables
Description: A “hands-on” lab that reinforces the concepts taught in MFET 3710 . Students will learn how to transfer CNC part programs from a PC to the CNC machine controller. Testing, editing and running their part programs on the CNC machines will also be covered.
May be repeated twice up to 3 credit hours.
MFET 3750 - Welding Metallurgy I Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $10.00
Course Fee Purpose: Paper, lab support, software licenses
Description: Metallurgical principles applied to welding and weldability of ferrous metals.
Pre-requisite(s): MFET 2150 /MFET 2150L or MFET 2153 , CHEM 1110 or CHEM 1210 .
Co-Requisite(s): MFET 3750L .
MFET 3750L - Welding Metallurgy I Lab Credits: (1)
Typically Taught Fall Semester: Full Sem
Course Fee: $85.00
Course Fee Purpose: Welding supplies
Description: A “hands-on” lab that reinforces the concepts taught in MFET 3750 of metallurgical principles applied to welding and weldability of ferrous metals.
Pre-requisite(s): MFET 2150 /MFET 2150L , CHEM 1110 .
Co-Requisite(s): MFET 3750 .
MFET 3760 - Welding Metallurgy II Credits: (2)
Typically Taught Spring Semester: Full Sem
Course Fee: $10.00
Course Fee Purpose: Paper, lab support, software licenses
Description: Metallurgical principles applied to welding and weldability of nonferrous metals.
Pre-requisite(s): MFET 3750 /MFET 3750L .
Co-Requisite(s): MFET 3760L .
MFET 3760L - Welding Metallurgy II Lab Credits: (1)
Typically Taught Spring Semester: Full Sem
Course Fee: $85.00
Course Fee Purpose: Welding supplies
Description: A “hands-on” lab that reinforces the concepts taught in MFET 3760 of metallurgical principles applied to welding and weldability of nonferrous metals.
Pre-requisite(s): MFET 3750 /MFET 3750L .
Co-Requisite(s): MFET 3760 .
MFET 3810 - Experimental Course Credits: (1-6)
Experimental
Description: Consult the semester class schedule for the current offering under this number. The specific title and credit authorized will appear on the student transcript.
May be repeated for a total maximum of 6 credit hours.
MFET 3820 - Nondestructive Testing Credits: (3)
Typically Taught Spring Semester: Full Sem
Course Fee: $30.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: Fundamental concepts relating to liquid penetrant, magnetic particle, ultrasonics, and radiography and other NDT processes.
Pre-requisite(s): MATH 1210 or MATH 1110 and PHYS 2010 or PHYS 2210 .
MFET 3830 - Reinforced Plastics/Advanced Composite Lecture/Lab Credits: (3)
Typically Taught Spring Semester: Full Sem
Course Fee: $135.00
Course Fee Purpose: Paper, lab support, lab consumables
Description: Polymer and reinforcement systems; material testing; mold design and development; laboratory involvement in reinforced plastics production processes.
Pre-requisite(s): MFET 3350 /MFET 3350L and MFET 2860 .
MFET 3870 - Mold Design and Process Strategies Lecture/Lab Credits: (3)
Typically Taught Fall Semester: Full Sem
Course Fee: $50.00
Course Fee Purpose: Paper, lab support, lab consumables
Description: Overview of mold design and the development of strategies and techniques integrating CAD and CAE technologies for optimizing part quality, moldability, and productivity. Additional study on design and construction of various types of production molds that are used for processing plastics in final shape. Product design in relationship to molding techniques and various techniques and materials used to construct the molds are the major units of study.
Pre-requisite(s): MFET 2850 and MFET 2870 .
MFET 3890 INT - Cooperative Work Experience Credits: (1-3)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Description: Open to all third year students in Manufacturing Engineering Technology. A continuation of MFET 1890 .
MFET 4050 - Detailed Scheduling and Planning I Credits: (2)
Description: Techniques and practices of detailed scheduling and planning of inventory management including order review methodologies, policies and functions of inventory. Covers lot sizing, safety stock techniques, demand, and Just-in-Time as they relate to detailed scheduling and planning.
Pre-requisite(s): MFET 3510 or equivalent. (APICS series).
Note: This course is offered in the evenings only.
MFET 4090 - Welding Power Sources Credits: (2)
Typically Taught Fall Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: Study of power sources used to generate and control voltage and amperage for welding.
Two lectures per week.
Pre-requisite(s): EET 1850 .
MFET 4150 - Execution and Control of Operations Credits: (2)
Description: Focuses on prioritizing and sequencing work, executing work plans, implementing controls, reporting activity results, and evaluating and providing feedback on performance. Eval.
Pre-requisite(s): MFET 3510 or equivalent. (APICS Series).
Note: This course is offered in the evenings only.
MFET 4200 - Manufacturing Processes Credits: (2)
Description: Manufacturing processes define the methods that companies use in designing, producing, and delivering goods and services required by customers. The manufacturing processes provide the execution component to the other activities of the integrated manufacturing system. Beginning with customer requirements and needs, they design, build, operate, upgrade, and maintain a manufacturing process which is most supportive of and consistent with those needs and requirements. To achieve these objectives, manufacturing processes draw on three different but very interrelated subsystems: industrial facilities management, process design and development, and manufacturing. (APICS Series)
Note: This course is offered in the evenings only.
MFET 4210 - Cost Estimating and Engineering Economics Credits: (2)
Description: Production cost structure, operation costing, break-even analysis, make buy decision, and capital equipment justification. Computer aids are used to analyze cost data.
Three lectures per week.
Pre-requisite(s): MATH 1080 ; WEB 1700 .
Co-Requisite(s): MFET 4610 .
MFET 4250 - Detailed Scheduling and Planning Credits: (2)
Description: Detailed explanation of inventory management including order review methodologies, policies and functions of inventory. Covers material requirements planning (MRP) and other material planning and capacity requirements planning techniques. Includes concepts, principles, interfaces, desired characteristics, applications, and supplier relations.
Pre-requisite(s): MFET 3510 or equivalent. (APICS Series)
Note: This course is offered in the evenings only.
MFET 4300 - Design of Experiments Credits: (2)
Description: A step-by-step description of procedures used to organize, conduct and evaluate industrial experiments. Emphasizes the usefulness of results and the decision criteria for choosing the proper design.
Pre-requisite(s): MFET 2410
MFET 4310 - Corrosion and Corrosion Control Credits: (2)
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: Analysis of corrosion mechanisms for ferrous metals, nonferrous metals, and nonmetallic materials, as well as the control of corrosion.
Pre-requisite(s): CHEM 1110 and MATH 1080 .
MFET 4315 - Welding Robotics Credits: (2)
Typically Taught Spring Semester: Full Sem
Course Fee: $30.00
Course Fee Purpose: Paper, lab support, software licenses
Description: This course is designed to introduce students to welding robot programming and applications. Students will demonstrate skills learned in welding robot programming in applied labs. They will learn parameters, terms and nomenclature and obtain knowledge of applications and configurations in industry settings.
Pre-requisite(s): MFET 2670 , MFET 2670L .
MFET 4350 - Principles of Lean Manufacturing Credits: (2)
Typically Taught Spring Semester: Online
Description: This course introduces students to lean manufacturing and waste reduction concepts such as work standardization, visual manufacturing & workplace organization, value stream mapping, setup reduction & batch size reduction, quality at the source, point of use storage, total productive maintenance, pull systems/kanbans, tack time calculation and cellular/synchronous manufacturing design concepts.
A combination of lectures, videos and hands on exercise will be used.
MFET 4550 - Advanced Quality Principles Credits: (2)
Description: Provides advanced study in all aspects of the application of quality principles to a production environment. The course will involve case study and application of quality theory. Students should have a broad knowledge of organizational structure and planning, quality techniques, customer satisfaction and focus, project management, and human resource management. Cooperative experience in a business/industry is recommended. (ASQC Series)
Pre-requisite(s): MFET 2410 or equivalent.
Note: This course is offered in the evenings only.
MFET 4580 - Process Automation II & Robotics Credits: (1)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Computer lab refurbishment, software, lab aide
Description: An advanced study of the elements used in manufacturing automation and control technologies including: the use of basic elements of an automated system, cost benefit analysis, programmable logic controllers, robotics (servo and non-servo), material handling devices and automated inspection technologies. One 1-hour lecture per week.
Pre-requisite(s): MFET 2500 and MFET 2510 .
Co-Requisite(s): MFET 4585 .
MFET 4585 - Process Automation II Lab Credits: (2)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $75.00
Course Fee Purpose: Mechatronics automation equipment and consumables
Description: Students work in teams to demonstration proficiency programming individual automated manufacturing stations using Allen Bradley PLCs (Cognex Vision Systems, RF Systems, bar coding, pick and place feeding station, gauging station, part orientation processing station, sorting-buffering station, servo robotic assembly station-Fanuc, torque assembly station, inventory storage station, electro-hydraulic station). Students then work as a class to integrate an entire manufacturing process using all of the stations for a small part. Labs will include additional lectures.
Pre-requisite(s): MFET 2500 and MFET 2510 .
Co-Requisite(s): MFET 4580 .
MFET 4610 - Senior Project Management & Cost Estimating Credits: (3)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $25.00
Course Fee Purpose: Paper, lab support, computers, software licenses, lab equipment
Description: This is designed as a capstone course for students and is to be taken in the senior year of their program. The course will teach students fundamental principles in Project Management, Cost Estimating, and Engineering Economics that will be necessary to successfully complete their Senior Project experience. Students must apply and gain departmental approval before entering Senior Project. Approval is based on an interview with department faculty and fulfilling the prerequisites listed on the “Senior Project Requirements Sheet” available from the department secretary. All students approved for Senior project will register for this course regardless of individual project group assignments.
Pre-requisite(s): MFET 3620 and AAS or AS Degree.
Co-Requisite(s): MFET 4610L for manufacturing students or PDD 4600 for design graphics students.
MFET 4610L - Senior Project Lab Credits: (2)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $50.00
Course Fee Purpose: Senior Project consumables
Description: Must apply for senior project before March 1 of the previous year. Must have department approval. Approval is based on an interview with department faculty and fulfilling the prerequisites listed on the “Senior Project Requirements Sheet” available from the department secretary. Time: as required to complete the project. Two consecutive semesters.
Co-Requisite(s): MFET 4610 (with MFET 4610L only).
MFET 4620L - Senior Project Lab Credits: (2)
Typically Taught Fall Semester: Full Sem
Typically Taught Spring Semester: Full Sem
Course Fee: $50.00
Course Fee Purpose: Senior Project consumables
Description: Must apply for senior project before March 1 of the previous year. Must have department approval. Approval is based on an interview with department faculty and fulfilling the prerequisites listed on the “Senior Project Requirements Sheet” available from the department secretary. Time: as required to complete the project. Two consecutive semesters.
Page: 1
| 2
|
|
